Don’t Keep Your Views to Yourself
Are you trying to figure out how to install your new blinds and curtains? Well, we’ve got good news for you: it’s simpler than you think! Whether your goal is to give your windows a finished look or just make sure that the sun doesn’t disturb happy hour on Friday night, this guide will walk you through the installation process step by step. Once you finish reading it, you’ll have an expert-level knowledge of how different types of window treatments are installed — so keep reading for all the must-know information and tips!
- Gather the Necessary Tools
Collect a measuring tape, a pencil or marker, a level, a drill, screws, or brackets (included with your blinds or curtains), a screwdriver, and a step ladder (if needed).
- Measure your Windows.
Take accurate measurements of the width and height of your window frame. Measure both the inside (recess) and outside (face) of the frame to determine the appropriate size for your blinds or curtains. Note down these measurements for reference.
- Determine the Mounting Location
Based on your measurements and personal preference, decide whether you want to mount the blinds or curtains inside the window frame (recess mount) or outside on the wall above the frame (face mount). This decision will impact the placement of brackets or supports.
- Mark the Positions
Use a pencil or marker to make light, level marks on the wall or window frame where you will be installing the brackets or supports. For recess mount, mark the inside top corners of the window frame. For the face mount, mark the points above the window frame or at your desired height.
- Install the Brackets or Supports
Follow the specific instructions provided by the manufacturer to attach the brackets or supports to the marked positions. Typically, you’ll need to drill pilot holes into the wall or window frame and use screws to secure the brackets. Ensure the brackets are level and aligned properly.
- Mount the Blinds or Curtain Rod
Carefully position the blinds or curtain rod onto the brackets or supports. Depending on the type of blinds or curtains, there may be specific attachment mechanisms. It is advisable to have someone assist you, especially for larger or heavier window treatments. Ensure the blinds or rods are securely mounted and leveled.
- Test the Functionality
Open, close, or slide the blinds or curtains to check their functionality. Ensure there are no obstructions, and they operate smoothly. Adjust the blinds or rod if needed to achieve proper functionality and alignment.
- Finishing Touches
Once the blinds or curtains are installed, trim any excess cords or strings using scissors or cord cleats, following the manufacturer’s instructions. If you have children or pets, consider using cord safety devices to keep them out of reach. Ensure the window treatments are properly aligned and adjust them if necessary to hang evenly.
Conclusion
After carefully reading our helpful guide, you should now have all the necessary information and instructions to successfully install your blinds and curtains. Though it may not be easy, it can always be done with a little bit of patience. And if installing your own curtains or blinds is not a task you want to tackle, consider using our curtain and blinds installation services coming soon to Sirwiss – from checkout to installation, we’ve got you covered!
Hopefully, this post has been informative and answered your questions about installing curtains and blinds on a budget. Now go out there and start beautifying your windows! Don’t forget to share down below in the comments if you have any questions or tips for other readers that we missed. Good luck!