Electronics Repairing
Electronic Damages and Repairs

Electronic Damages and Repairs

Let’s face it, this was bound to happen. One day, you must’ve dropped your device either on the ground or into a liquid substance that caused it to start glitching and breaking down. Now it’s either physically damaged or internally damaged, or probably even both. Right now, you probably don’t know why, so here is some information that could explain why it’s like this and what to do.

Why is my device broken?

Your electronics could be broken for several reasons. Those several reasons can be divided into two parts: Physical damage and Internal damage. Physical damage is when parts of the device become deformed due to fall damage, which would cause mechanical damage like cracked screens, broken pieces, water moisture, and internal combustion. Internal damage is when the internal components of a device suffered a breakdown due to various reasons such as moisture, electrostatic discharge, component failure, etc.

Physical damage:

  1. Cracked Screen
  2. Water Moisture
  3. Overcharged battery
  4. Internal combustion

Internal damage:

  1. Moisture
  2. Electrostatic discharge
  3. Overheating
  4. Component failure
  5. Software virus
  6. Internal combustion

These are some of the damages that electronic devices can take that would guarantee their failure. For these damages to not happen, here are some ways to fix these problems depending on the kind of device.

How not to break your laptop

  • Don’t heat it up

One of the worst ways to destroy your laptop is by letting it heat up without any air circulation. Laptops, when plugged into the charger or in power mode, tend to heat up to the point that you can barely touch the surface as it becomes stressed. That is why the fan vent must not be blocked as all the heat of the laptop is blown out instead of being stuck near the critical components.

  • Don’t handle it like garbage

Whenever you want to open or close the laptop screen, try opening it through the front or rear. One of the most common mistakes that laptop users make is by handling the screen by its hinges. Any laptop, no matter how expensive it is, can’t handle the pressure and would eventually break.

How not to break your phone

  • Don’t let your phone take a long tan.

If you think being in a kitchen while cooking is too hot, then think about your phone. Leaving your phone out in the sun for a long time is going to give it several damages such as a dead battery and a slow processing speed. Try this again for a few times, and the battery will probably explode.

  • Don’t let it swim

Whether you dropped it in a small puddle, a pile of snow, or even spilled some water on the screen, either way, your phone is ruined. Water damage is one of the most common mistakes by phone users. One method phone users try to fix the damage is by placing their phone on uncooked rice and hoping the rice soaks up the water, even though it would be more effective to just leave it in a cool dry place and let the water evaporate inside.

How not to break your PC

  • Don’t let it get sick

The worst way to break your PC doesn’t require any physical damage whatsoever. Any unknown file or site you click can inadvertently open your PC to a virus. Once that happens, it’s hard to remove it. That’s why it’s good etiquette to always make sure your software is up to date. To be extra sure your computer is virus-free, you better get antivirus software that can give you all the protections it needs against any suspicious malware.

  • Don’t eat where you type

Eating and drinking around your PC might sound fun if you’re lazy to use a separate table, but it’s one of the stupidest ways to ruin your PC. Eating food in front of your keyboard will get crumbs to land on it, making some keys hard to press and even damaging the switches. It’s just as bad as spilling coffee on it, ensuring the keyboard’s certain death.

Conclusion

Depending on the damage that your device has taken, electronic repair shops are the best place to get your electronics fixed. The results of the repairs could vary either way regarding skills, expertise, quality, diagnosis, fixability, and cost.

That’s why here at Sirwiss we give repair shops some much-needed visibility and a platform to attract customers to their service where they can book an appointment and get their phones, laptops, and computers repaired. So what are you waiting for? Do you want your broken device to be useless forever? Go to Sirwiss and get it fixed today.

Leave a Reply

Your email address will not be published. Required fields are marked *