Hit the Pedal with the Right Juice

Oil is the most essential part of our cars. It helps with keeping the engine running and our car going smoothly. But the oil in you doesn’t last forever, sometimes you need to fill it up again. But most people don’t know how to change their car’s engine oil. In this blog post, we’ll list out a step-by-step process on how you should change your engine’s oil.

• Gather Your Materials

Make sure you have all the necessary materials before you start. You will need a new oil filter, the correct type and amount of oil for your vehicle, a wrench, an oil filter wrench, a drain pan, and a funnel. It’s important to make sure you have the right type of oil for your vehicle, as using the wrong type of oil can cause damage to your engine.

• Warm Up Your Engine

Start your engine and let it run for a few minutes to warm up the oil. This will help the oil flow more easily when you drain it. Make sure you turn off the engine before you begin the oil change.

• Locate the Oil Pan

The oil pan is typically located underneath the engine. You may need to jack up the car or use ramps to access it. Once you locate the oil pan, place the drain pan underneath it.

• Drain the Oil

Use a wrench to loosen the drain plug on the oil pan, and then unscrew it by hand. Be careful when removing the plug, as the oil may be hot. Allow the oil to drain completely into the pan. It’s a good idea to wear gloves during this step to keep your hands clean.

• Change the Oil Filter

Locate the oil filter, which is usually located near the oil pan. Use an oil filter wrench to remove the old filter. Apply a small amount of oil to the gasket of the new filter, and then screw it on by hand. Do not overtighten the filter.

• Refill with Oil

Use a funnel to add the new oil to the engine. Check your owner’s manual to ensure you add the right amount and type of oil for your vehicle. Most vehicles require 4-6 quarts of oil, but this can vary depending on the make and model.

• Check the Oil Level

After adding the new oil, use the dipstick to check the oil level. If it’s low, add more oil until it reaches the correct level. Make sure the oil is at the right level before you start your engine.

• Clean Up

Dispose of the old oil properly and wipe up any spills or drips. You can take the used oil to a local auto parts store or recycling center for proper disposal.

• Start your Engine!

Start your engine and let it run for a few minutes to ensure the oil is circulating properly. Check for any leaks or drips around the oil filter and drain plug. If everything looks good, you’re done!

Conclusion

Now that you know how to change your car’s engine oil, why not get it done already if you’re car needs rejuvenating? Changing your engine oil is an important part of maintaining your vehicle. It’s recommended to change your oil every 5,000 to 7,500 miles, but this can vary depending on your driving habits and the type of oil you use.

If you need the help of a professional for this task, head over to Sirwiss and book a mobile mechanic to come to your house and change your car’s oil for you today.