How to Clean Your Water Tank
Where do you think your water comes from? The river, or the sea? The answer is the giant water tank on the roof of your building. A water tank stores water for a variety of purposes. They provide a steady supply of water to meet the needs of users, even when there is a temporary interruption in the water supply. Despite that, the tanks can eventually become dirty over time. That’s why it’s always recommended to have them cleaned regularly and not to be ignored.
In this blog post, we’ll explain the step-by-step process of how to clean your water tank when it gets dirty. Read on below if you want clean water.
- Turn Off the Water Supply
Before starting to clean the water tank, turn off the water supply that feeds the tank. This will ensure that no new water enters the tank while you are cleaning it.
- Drain the Water Tank
You can use a pump or a hose to remove all the water from the tank. If you have a hose, connect it to the tank’s drain valve, and direct the water to a safe drainage area, such as a garden or a drain. If you have a pump, submerge it into the tank and pump out the water.
- Scrub the Tank
Once the water is drained, use a stiff-bristled brush to scrub the inside of the tank. Pay special attention to the corners, seams, and other areas that may accumulate sediment and debris. You can also use a long-handled scrubber to reach the bottom of the tank.
- Rinse the Tank
After scrubbing, rinse the tank with clean water. Use a hose to fill the tank with water and drain it again. Repeat this process until the water coming out of the tank is clean and clear.
- Disinfect the Tank
To disinfect the tank, you can use a chlorine solution. Mix one part of chlorine bleach with ten parts of water. Pour the solution into the tank and let it sit for 30 minutes. This will allow the solution to kill any bacteria or other harmful microorganisms present in the tank. After 30 minutes, drain the tank again.
- Rinse the Tank Again
After disinfecting the tank, rinse it again with clean water. Use a hose to fill the tank with water and drain it again. Repeat this process until the water coming out of the tank is free of any chlorine odor or taste.
- Refill the Tank
Once you have finished cleaning and disinfecting the tank, it is safe to refill it with clean water. Turn on the water supply and let the tank fill up. Check for any leaks or other issues before using the water.
Conclusion
With all the steps laid out in how you’re going to clean the water tank, we know that you know what to do. If you still feel that you aren’t up to the task for your water tank, that’s fine. You can always call a professional team to get it done for you. Just head over to Sirwiss.ae and book a water tank cleaning team to come fix it today.